Roman Miroshnik
Doctor of Sci.
Industrial and Academic experience
-
R&D department, Israel Electric Corp. (Israel)
-
Aerospace Industry, R&D Stress Department (Moscow, Russia)
Teaching experience:
-
Tel Aviv Academic College of Engineering, (Israel)
-
Moscow Polytechnic Institute, (Russia)
-
Moscow Bauman Technical University, (Russia)
-
Moscow Electro-
Technical
University
of Communication,
(Russia)
Major directions of specialization:
-
Numerical methods of solution of nonlinear boundary problems
-
Thermal processes: Steady-State, Transient, Thermal stresses
-
Finite element methods in Fracture mechanics
-
Stress analyses and Reliability methods
Awards:
Languages -
Hebrew, English, Russian
ROMAN MIROSHNIK'S LIST OF PAPERS
PUBLISHED IN SCIENTIFIC JOURNALS
(In English)
1. Force Safety Device for
Electric Substation with Flexible Buses (with D. Laredo and H. Ben Haim),
Power Engineering Society
(PES) General Meeting, San Francisco, June 2005.
2. Probabilistic model of
stresses in synthetical isolators (with D. Laredo and H. Ben Haim),
The International Symposium on Stochastic Models in Reliability,
Safety, Security and Logistics, SMRSSL'05, Beer Sheva, Febr. 2005.
3. Life
Assessment of Chest Valve under Pressure and Thermal Stresses, ANSYS
annual conference, Pittsburg USA, (2004), Best of Session Technical
Paper Award.
4. Three
Dimensional Steady-State String Motion in a Fluid Flow. Journal of
Applied Mechanics, Transactions of the ASME, Vol. 71, No. 6, Nov. 2004,
p. 894-895.
5. Force
Safety Device for Substation with Flexible Buses, IEEE Transactions on
Power Delivery, Vol.18, No. 4, Oct. 2003, p.1236-1241.
6. The
Phenomenon of Steady-State String Motion. Journal of Applied Mechanics,
Transactions of the ASME, Vol. 68, No. 4, July 2001, p. 568-574.
7. The
probabilistic model of the dynamic of the cables under short-circuit
current, Computer Methods in Applied Mech. & Engin., Vol. 187/1-2, p.
201-211 (July 2000).
8. Probabilistic
life assessment of chest valve under thermal stresses (with A. Yeger &
H. Ben Haim), Intern. Journal of Pres. Vess. & Piping Vol. 75, No. 1, p.
1-5 (1998).
9. Life
assessment of chest valve under pressure and thermal stresses (with H.
Ben Haim), Proceeding of the 8-th International ANSYS Conference and
Exhibition, Pittsburgh, USA, (August 1998).
10. Service
life of Main Piping component due to low fatigue thermal stresses (with
H. Ben Haim), Proceeding of the 27-th Israel Conference in Mechanical
Engineering, Haifa, Israel (May 1998).
11. Life
assessment evaluation of piping branch connection under creep & fatigue
(with D. Elmakis). Intern. Journal of Pres. Vess. and Piping, Vol. 71,
No. 2, p. 147-154 (1997).
12. Probabilistic
finite elements approach to transient thermal stresses in piping,
Proceeding of the 11-th International Conference of the Israel Society
for quality, p. 93-97, Jerusalem (November 1996).
13. Steady-state
motion of a filament in media of different viscosity (with Svetlicky V.,
Kurkin V.), Applied Mechanics, N-Y. Vol. 8, No. 4, p. 100-104 (1972).
14. Critical
velocities of the steady¡
state motion of an elastic filament in a plane homogeneous flow (with
Svetlicky V.), Applied Mechanics, N-Y, Vol. 9, No. 5, p. 94-98 (1973).
15. Determination
of steady modes of a closed filament rotation about the vertical axis
(with Svetlicky V. , Kurkin V.), Applied Mechanics, N-Y, Vol. 21, No. 5,
p. 106-110 (1985).
16. To
spatial stationary movement of the heavy perfectly flexible bar (with
Kurkin, V. I), Applied Mechanics, N-Y, Vol. 24, No. 1, p. 113-116
(1988).
(In Russian)
17. Numerical
solution nonlinear equations of static’s flexible bars, Structural
Design, Mechanical Engineering, Vol. 29, p. 141-147 (1989).
18. Numerical
solution of the stability problems of straight bars with resilient
bearings, Proceeding of the Central Air-Hydro Institute, Vol. 19, No. 1,
p. 67-77 (1988).
19. Numerical
solution mechanics flexible bars nonlinear of many bearing boundary
problems, Structural Design, Mechanical Engineering, Vol. 31, p. 152-157
(1990).
20. Numerical
solution of boundary problems for the curvilinear bars. Proceedings of
the Central Air-Hydro Institute, Vol. 21, No. 6 (1990).
21. To
numerical solution stability of flat ring problems. Proceedings of the
Central Air-Hydro Institute, Vol. 20, No. 3, p. 125-130 (1989).
22. Form
and tension determination of the filament having one fixed end;
Structural Design, Mechanical Engineering, Vol. 27, p. 102-107 (1987).
23. On
the stationary movement of the closed flexible filament with
intermediate roller (with Kurkin V.), Higher Education Establish,
Mechanical Engineering, No. 4, p. 3-7 (1987).
24. Form
and tension determination of the double bearing filament, stretching at
the end by the known force, Structural Design, Mechanical Engineering,
Vol. 28, p. 17-23 (1988).
25. Steady-state
motion of filament with an arbitrary angle of launching (with Svetlicky
V., Kurkin V.), Higher Education Establish, Mechanical Engineering, No.
3, p. 37-42 (1972).
26. Research
of the ballistic antenna stationary motion in flat homogeneous flow,
Higher Education Establish, Mechanical Engineering, No. 10, p. 27-32
(1972).
27. Spatial
location of ideal flexible filament in homogeneous flow, Material
Resistance and Theory of Structures (with Svetlicky V.), Vol. 19, p.
119-121 (1973).
28. Influence
of wind loading on the form of ballistic antenna (with Kurkin V.),
Higher Education Establish, Mechanical Engineering, No. 5, p. 18-21
(1974).
29. Oscillations
of the filament movement in the viscous medium (with Svetlicky V.),
Higher Education Establish, Mechanical Engineering, No. 10, p. 5-8
(1974).
30. Research
of the ballistic antenna stationary movement in the flow of arbitrary
direction (with Svetlicky V.), Mech. & Theory of Structures, Vol. 27,
36-42 (1975).
31. To
the flat stationary movement of flexible filament; Higher Education
Establish. (with Kurkin, V.), Mechanical Engineering, No. 2, p. 4, 9-14
(1976).
32. Mathematical
modeling of the rocket catapulting from the planes (with Vatolin, V. and
Terekhov V.), Air-Fleet Techniques, No. 4, p. 25-34 (1976).
33. Designing
of the work parameters and conditions of the ballistic antennas (with
Kurkin, V.), Higher Education Establish, Mechanical Engineering, No. 9,
p. 56-58 (1978).
34. Dynamics'
research of the component shifting using a manipulator (with Vatolin, V.
and Terekhov V.), Higher Education Establish, Mechanical Engineering,
No. 11, p. 147-152 (1978).
35. Determination
of form and tension of the bars, sagging in the flow flatness (with
Gregoryants M.), Higher Education Establish, Mechanical Engineering, No.
3, p. 3-6 (1981).
36. Structural
design by the method of modulus final components of the cabins' probe "Buran"
(with Mikhailova A., Semenov, V.), Air-Fleet Techniques, No. p. 8-9,
53-61 (1981).
37. Forms'
and tension' determinations of the perfectly flexible moving bar (with
Svetlicky, V.), Higher Education Establish, Mechanical Engineering, No.
11, p. 18-22 (1981).
38. Structural
design of the modulus components of cabin of the probe "Buran" (with
Zorkov, V.). Air-Fleet Techniques, No. 2, p. 76-84 (1988).
39. Numerical
solution of the stability problem of curvilinear bars (with Svetlicky,
V.), Higher Education Establish, Mechanical engineering, No. 6, p. 7-11
(1988).
40. Filaments
counter-mode dynamics control of tethered probe (with Andreev V., Kurkin,
V. Terentyew Y .), Proceedings of the 4-th International Seminar, Frunze,
p. 167-179 (1989).
41. Parameters
selection of contour movement by controlling relative shift of the bind
probes (with Andreev V., Kurkin, V. Terentyew Y .), Proceedings of the
24-th K. A. Tsiolkovsky Seminar, Cosmic Flight Mechanical Moscow, p.
41-50 (1990).
42. Review
of the numerical methods of solution the flexible bar mechanics boundary
problems, Deposited in the Central Scientific Technical Institute, No.
12, p. 31-37 (1990).
43. Structural
design of the straight cylindrical tooth gearing using digital
calculator (with Battakov D.), Central Scientific Research Institute of
Economics of Coal Industry, p. 173-177 (1970).
44.To the
question of parameters' determinations of destroying mountain mass,
influencing on the formation of dynamic loads of facing machines (with
Brener V., Karalyus, A., Gorchakov A.), "Nedra" Collection of Works, "Ciprouglegormash",
p. 37-43 (1971).
